Kabel Jumper 10cm Dupont Pelangi 10 cm Male to Male 1 lembar isi 40

Harga untuk 10pcs Resistance: 220 Ohm Wattage Rating: 0.25 Watt Tolerance: 1% Metal Film Lead Free ROHS compliant

Features: Brand new and high quality. Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current protection. Working Voltage: DC 12V – DC 40V. Control Power:0.01 – 400W. Static Current:0.02 A ( Standby ). PWM Duty Cycle:10% -100%. PWM Frequency:13 KHz.

The power supply is isolated industrial power modules, with a temperature protection, overcurrent and short circuit full protection, high and low voltage isolation, AC85 ~ 265V wide voltage input, AC and DC, 431 DC5V output voltage precision, ultra-small size, high reliability, cost performance characteristics. – Input voltage: AC 85 ~ 265v 50 / 60HZ or… selengkapnya

Kabel jumper Dupont untuk jumper Arduino atau Raspeberry Pi 20 cm Female to female 1 lembar = 40 kabel

Deskripsi Produk “LED Dot Matrix Display dengan 32×8 pixel, berwarna Merah, menggunakan IC MAX7219 sebagai driver dan dapat dikoneksikan ke minsys/Arduino menggunakan komunikasi serial SPI (3 pin). Produk ini memiliki 4 buah 8×8 RED LED Dot Matrix (total pixel 32×8) dan 4 buah IC MAX7219 yang sudah terangkai secara cascade dalam 1 board. Dapat dirangkai… selengkapnya

Specifications: Operating voltage: DC3-5V Operating current: less than 20mA Sensor Type: Analog Detection Area: 40mmx16mm Production process: FR4 double-sided HASL Operating temperature:10-30 Humidity: 10% -90% non-condensing Product Dimensions: 62mmx20mmx8mm

Features – Calibrated directly in Celsius (Centigrade) – Linear + 10.0 mV/C scale factor – 0.5C accuracy guaranteeable (at +25C) – Rated for full 0 to +100C range – Suitable for remote applications – Low cost due to wafer-level trimming – Operates from 4 to 30 volts – Less than 60 A current drain –… selengkapnya

Spesifikasi : – 16×2 – Warna Biru – Tegangan kerja : 5v – Sudah include module I2C Backpack dan tersolder Digunakan untuk keperluan display project seperti Arduino, Raspberry, AVR dll.

ESP-WROOM-32 is Powered by Espressif’s most advanced SoC, the ESP-WROOM-32 features high performance, a wide range of peripherals, Wi-Fi and Bluetooth radio, which provide a complete solution tailored to advanced IoT applications. 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS Integrated 520 KB SRAM Integrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack and LWIP… selengkapnya

Warna : biru dan merah Bahan Alumunium 25T include baut 2 pcs