DS3231SN DS3231 SN I2C RTC Module & Baterai Modul Jam Arduino

this is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of for Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only… selengkapnya

Fitur: -Dapat mendeteksi api atau panjang gelombang sumber cahaya dalam 760nm ~ 1100nm – Api lebih ringan mendeteksi jarak 80cm -Membuat nyala api, lebih jauh jarak uji -Deteksi sudut: 60 derajat, sangat sensitif dengan spektrum api – Sensitivitas dapat disesuaikan (potensiometer digital biru)

Deskripsi Produk “LED Dot Matrix Display dengan 32×8 pixel, berwarna Merah, menggunakan IC MAX7219 sebagai driver dan dapat dikoneksikan ke minsys/Arduino menggunakan komunikasi serial SPI (3 pin). Produk ini memiliki 4 buah 8×8 RED LED Dot Matrix (total pixel 32×8) dan 4 buah IC MAX7219 yang sudah terangkai secara cascade dalam 1 board. Dapat dirangkai… selengkapnya

Modul sensor tegangan AC bolak balik 3 fasa ini menggunakan optocoupler sehingga tegangan input (AC) tidak akan mengganggu/membahayakan tegangan output (sistem digital) Tegangan output berupa tegangan digital (3.3V/5V=logic HIGH, 0V=logic LOW) , dapat langsung dihubungkan dengan NodeMCU, WEMOS, ESP8266, Arduino atau Raspberry Pi Pinout (gambar 3) – R, S, T (Fasa) + N (Netral), untuk… selengkapnya

This is a set of transmitter and receiver in one of the photoelectric sensor. Detection distance can be adjusted according to requirements. The sensor has a detection distance, interference by visible light, cheap, easy to assemble, easy to use, can be widely used in robot obstacle avoidance, line piecework and many other occasions. Output current… selengkapnya

Features: It is of high power density, high efficiency, high-reliability, small size and lightweight. It can isolate unsteady single-way voltage output. Low ripple coefficient and low static current can promote your work efficiently. Applicable to distributed power supply system and the circuit that is powered by a small power source.Such as industrial control industry, instrumentation… selengkapnya

12A 300W DC Buck Step Down Converter CC CV Driver LED charge Battery Spesifikasi: Input Voltage: 5-40V Output Voltage: 1.2-35V (adjustable) Output Current: 12A (jika suhu melebihi 65 derajat perlu tambahan fan) Constant current range: 0.2-12A (adjustable), saran dibawah 9A Output Power: Max 300W Indikator merah: Status charging / CC CV Indikator hijau: Status full… selengkapnya

Spesifikasi : – 16×2 – Warna Biru – Tegangan kerja : 5v – Sudah include module I2C Backpack dan tersolder Digunakan untuk keperluan display project seperti Arduino, Raspberry, AVR dll.

Warna : biru dan merah Bahan Alumunium 25T include baut 2 pcs

MERK : TOWER PRO MG995 180 derajat Specifications Weight: 55 g Dimension: 40.7 x 19.7 x 42.9 mm approx. Stall torque: 9.4 kgfcm (4.8 V ), 11 kgfcm (6 V) Operating speed: 0.17 s/60 (4.8 V), 0.14 s/60 (6 V) Operating voltage: 4.8 V a 7.2 V Running Current 500 mA Stall Current 2.5 A… selengkapnya