LED 3mm Lampu LED 3 mm

Putaran = 180º Specifications • Weight: 55 g • Dimension: 40.7 x 19.7 x 42.9 mm approx. • Stall torque: 9.4 kgf·cm (4.8 V ), 11 kgf·cm (6 V) • Operating speed: 0.17 s/60º (4.8 V), 0.14 s/60º (6 V) • Operating voltage: 4.8 V a 7.2 V • Running Current 500 mA – •… selengkapnya

Warna : biru dan merah Bahan Alumunium 25T include baut 2 pcs

Description: TP5100 is a double switch buck 8.4V, single cell 4. 2V lithium battery charge management chip. Its ultra-compact QFN16 package and simple external circuit, making TP5100 ideal for portable equipment so large current charging management applications. Meanwhile, TP5100 built—in input overcurrent, undervoltage protection, over temperature protection, short circuit protection, battery temperature monitoring, reverse battery… selengkapnya

Features: It is of high power density, high efficiency, high-reliability, small size and lightweight. It can isolate unsteady single-way voltage output. Low ripple coefficient and low static current can promote your work efficiently. Applicable to distributed power supply system and the circuit that is powered by a small power source.Such as industrial control industry, instrumentation… selengkapnya

Deskripsi Produk “LED Dot Matrix Display dengan 32×8 pixel, berwarna Merah, menggunakan IC MAX7219 sebagai driver dan dapat dikoneksikan ke minsys/Arduino menggunakan komunikasi serial SPI (3 pin). Produk ini memiliki 4 buah 8×8 RED LED Dot Matrix (total pixel 32×8) dan 4 buah IC MAX7219 yang sudah terangkai secara cascade dalam 1 board. Dapat dirangkai… selengkapnya

Modul sensor tegangan AC bolak balik 3 fasa ini menggunakan optocoupler sehingga tegangan input (AC) tidak akan mengganggu/membahayakan tegangan output (sistem digital) Tegangan output berupa tegangan digital (3.3V/5V=logic HIGH, 0V=logic LOW) , dapat langsung dihubungkan dengan NodeMCU, WEMOS, ESP8266, Arduino atau Raspberry Pi Pinout (gambar 3) – R, S, T (Fasa) + N (Netral), untuk… selengkapnya

ESP-WROOM-32 is Powered by Espressif’s most advanced SoC, the ESP-WROOM-32 features high performance, a wide range of peripherals, Wi-Fi and Bluetooth radio, which provide a complete solution tailored to advanced IoT applications. 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS Integrated 520 KB SRAM Integrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack and LWIP… selengkapnya

Harga untuk 10pcs Resistance: 220 Ohm Wattage Rating: 0.25 Watt Tolerance: 1% Metal Film Lead Free ROHS compliant

this is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of for Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only… selengkapnya

This is a set of transmitter and receiver in one of the photoelectric sensor. Detection distance can be adjusted according to requirements. The sensor has a detection distance, interference by visible light, cheap, easy to assemble, easy to use, can be widely used in robot obstacle avoidance, line piecework and many other occasions. Output current… selengkapnya