Kabel Jumper 10cm Dupont Pelangi 10 cm Male to Male 1 lembar isi 40

Spesifikasi : – 16×2 – Warna Biru – Tegangan kerja : 5v – Sudah include module I2C Backpack dan tersolder Digunakan untuk keperluan display project seperti Arduino, Raspberry, AVR dll.

Features: Brand new and high quality. Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current protection. Working Voltage: DC 12V – DC 40V. Control Power:0.01 – 400W. Static Current:0.02 A ( Standby ). PWM Duty Cycle:10% -100%. PWM Frequency:13 KHz.

Kabel jumper Dupont untuk jumper Arduino atau Raspberry Pi 20 cm Male to Male 1 lembar = 40 kabel

Product Name: Tactile Switch; Material: Metal, Plastic Package Content: 30 Pcs x Tactile Switch; Main Color: Black, Silver Tone Total Size(Pin No Include): 6 x 6 x7mm Action Type: Momentary

Features – Calibrated directly in Celsius (Centigrade) – Linear + 10.0 mV/C scale factor – 0.5C accuracy guaranteeable (at +25C) – Rated for full 0 to +100C range – Suitable for remote applications – Low cost due to wafer-level trimming – Operates from 4 to 30 volts – Less than 60 A current drain –… selengkapnya

The power supply is isolated industrial power modules, with a temperature protection, overcurrent and short circuit full protection, high and low voltage isolation, AC85 ~ 265V wide voltage input, AC and DC, 431 DC5V output voltage precision, ultra-small size, high reliability, cost performance characteristics. – Input voltage: AC 85 ~ 265v 50 / 60HZ or… selengkapnya

Modul sensor tegangan AC bolak balik 3 fasa ini menggunakan optocoupler sehingga tegangan input (AC) tidak akan mengganggu/membahayakan tegangan output (sistem digital) Tegangan output berupa tegangan digital (3.3V/5V=logic HIGH, 0V=logic LOW) , dapat langsung dihubungkan dengan NodeMCU, WEMOS, ESP8266, Arduino atau Raspberry Pi Pinout (gambar 3) – R, S, T (Fasa) + N (Netral), untuk… selengkapnya

Kabel Jumper Dupont Pelangi 10 cm female to female 1 lembar = 40 kabel

This is a set of transmitter and receiver in one of the photoelectric sensor. Detection distance can be adjusted according to requirements. The sensor has a detection distance, interference by visible light, cheap, easy to assemble, easy to use, can be widely used in robot obstacle avoidance, line piecework and many other occasions. Output current… selengkapnya